E018-WG

Introduction

E018-WG is maleic anhydride grafted polypropylene (PP-g-MAH). As an excellent product in the E018 series, it excels both in terms of grafting ratio and odorlessness. Due to the use of a special polycopolymerization system, E018-WG features a low melting point, high fluidity, and low molecular weight. It is suitable for polypropylene infiltration systems and is currently widely applied in LFT series products.

application

1、Polyolefin alloy compatibilizer;
2、PP reinforcement and filling;
3、High-filled engineering plastics system;
4、LFT series products;
5、Fiberglass-reinforced PP/PE with special odor test requirements;
6、Mineral-filled PP/PE with special odor test requirements.    

related parameters

Disclaimer: Data provided is based on internal laboratory testing and serves as a reference for material selection. It shall not be construed as product specifications.

Testing Limitations: Due to limited data and experience, the above performance metrics are for reference only.   

Notes:

[1] MFR measured at 190°C, 2.16 kg load.

[2] Grafting ratio classification: Ultra high: >1.8% | Very High: 1.0–1.2% | High: 0.8–1.0% | Moderately high: 0.5–0.8% | Medium: ≈0.5%.

Packaging and Storage    

25 KG kraft paper bags with inner plastic liners.
Store in dry, ventilated, cool conditions (≤27°C). Avoid humidity and direct sunlight. Use promptly after opening.